Dnotomista Trash Fansub
Vuoi reagire a questo messaggio? Crea un account in pochi click o accedi per continuare.
Dnotomista Trash Fansub

ANATOMIA ...proprio quel minuto tagliamento, che si fa delle membra de' corpi umani da' medici, per veder la compositura interna di essi corpi: e quegli, che esercita cotale arte, e detto NOTOMISTA. Qui per simil. Lat. anatomia dissectio
 
IndiceIndice  Ultime immaginiUltime immagini  CercaCerca  RegistratiRegistrati  Accedi  
***** 20th Century Boys - Chapter 3: Our Flag ***** Amalfi - Megami no hoshu *****

 

 DIY LED Grow Panel

Andare in basso 
AutoreMessaggio
yunaoled





DIY LED Grow Panel Empty
MessaggioTitolo: DIY LED Grow Panel   DIY LED Grow Panel Icon_minitimeMar Dic 27, 2011 6:39 am

LED grow sections offer an energy-efficient method to grow indoor plants. These lights only use 10 % from the souped up that other kinds of lights use, and also the lights have a longer life time. They can also be customized to suit the precise needs of the new plants. Plants require blue light to create foliage and red-colored light to flower. By mixing both of these colors of LED Light Module right into a grow panel, you are able to give your plants what they desire.

1

Drill holes within the wooden board using the drill and small bit, space the holes 3 1/2 " apart in uniform rows. Leave an area about 6 inches wide round the edge.

2

Push one LED lamp through each hole within the wooden board, before the first string is completed. Plug the 2nd string of lights into the foremost and still place the lights until all of the holes are filled.

3

Attach the lights towards the board utilizing a hot-glue gun. Put the tip from the glue gun around the board beneath the cord and lightly pull the trigger to produce a small amount of glue. Press each period of cord in to the hot glue until it dries. For each 3-inch-period of cord, use two drops of glue.||Panel LED Light

4

While using large bit, drill an opening in each corner from the board a couple of inches from the sides.

5

Reduce your rope into two 3-feet measures having a utility knife. Thread the finishes of 1 bit of rope with the holes around the shorter sides from the board. Knot the finishes. Repeat on the other hand.||LED Light Bulb

6

Have a third bit of rope and thread it with the rope loops attached to the board. Make use of this third bit of rope to hold your grow light six to ten inches above your plants. The size of the 3rd bit of rope will rely on what lengths you would like the grow light to hold.

7

Plug your LED grow panel into a wall outlet.
Torna in alto Andare in basso
 
DIY LED Grow Panel
Torna in alto 
Pagina 1 di 1

Permessi in questa sezione del forum:Non puoi rispondere agli argomenti in questo forum.
Dnotomista Trash Fansub :: Coming soon(Ecco cosa vi attende a breve...)-
Vai verso:  
Statistiche